Karimpura, Ludhiana, Punjab

GST No. 03AGMPG3638G1ZL

Send Email

0804895691286% Response Rate

Home

About Us

Our Products

Contact Us

Home » Our Products » V Belts

V Belts

Prominent & Leading Wholesale Distributor from Ludhiana, we offer gates poly flex belt, continental v belts, continental insta-power v belt, gates industrial micro-v k-section belts, continental fhp v belt and continental timing belt.

Gates Poly Flex Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 300 / PieceGet Latest Price

Product Details:

Material	Rubber
Color	Black
Brand	Gates
Working temperature	-20/+80 Deg C
Width	35mm
Country of Origin	Made in India

We are engaged in offering our clients with Poly V Belt, these belts are widely demanded by the clients for their quality and are appreciated by the clients.

Features:

These belts eliminate belt matching and permits drive design to meet exact power or space requirements.
They permit cooler running and high drive efficiency.
These belts excel on small pulleys at high speeds.

Yes! I am interested

Continental V Belts

REQUEST CALLBACK

Get Best Quote

Approx. Rs 120 / PieceGet Latest Price

Product Details:

Brand	Continental
Heat Resistance	Yes
Temperature Range	+140 deg C
Model	HY-T
Length Range	3550 mm
Country of Origin	Made in India

Wedge cross-section means the belts are narrower and weigh less. Narrower belts allow for the use of thinner and lighter sheaves, resulting in a more efficient drive. The savings continue through the higher horsepower capacity provided by HY-T V-belt construction. Vytacord tension members provide strength and dimensional stability. Higher horsepower capacity is also provided through a tough engineered rubber compound cushion, adding to belt strength.

HY-T Wedge, with its narrow cross-section, makes it possible to achieve a required horsepower with fewer HY-T Wedge belts than with standard V-belts, reducing sheave size, sheave costs and belt costs even more. Since less power is required to run the smaller, lighter drives, more power gets to the load. Therefore, you may be able to downsize drive motors and/or increase drive efficiency for even more savings. HY-T Wedge envelope belts are identified with a 3V, 5V or 8V prefix and are recommended for drives where pulsation, shock loads, high tension and long centers are involved.

It features a continuous V-section that is protected by a wide angle, synthetic fabric impregnated with high-quality engineered rubber compound. This unique envelope achieves the high strength HY-T Wedge belts need to withstand high loading forces. It also provides the torsional rigidity required in long center drives delivering the traction needed for accurate tracking and precision performance.

Also Available in:

Temperature -40 to +139 Deg C
Length Range 550 to 3540 mm

Yes! I am interested

Continental Insta-Power V Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 300 / PieceGet Latest Price

Product Details:

Brand	Continental
Material	PU
Belt Type	V Belt
Length	15 meter
Usage	Industrial
Packaging Type	Box, Plastic Bag
Country of Origin	Made in India

Insta-Power® (Aramid Classical) Belts are built for strength and endurance. Every element of the Insta-Power® belt is designed to deliver premium, long-life performance in demanding outdoor power equipment service. Insta-Power belts are engineered to take the abuse of repeated sudden shock loads, tolerate high ambient temperatures and resist the damaging effects of oil and dust.

Applications:

Delivers high-performance consistently in lawn and garden drives up to 20 horsepower. Also ideal for other power equipment where reverse bend idlers, misalignment and quarter-turn drives cause ordinary belts to fail.
High-strength aramid tensile members oil, heat, ozone and abrasion resistant static conductive.

Also Available in:

Length - 10-14 meter

Yes! I am interested

Gates Industrial Micro-V K-Section Belts

REQUEST CALLBACK

Get Best Quote

Approx. Rs 70 / PieceGet Latest Price

Product Details:

Brand	Gates
Section	PL
Effective Length	2705 mm
Cord Type	PES
Number of Ribs	18
Color	Black
Material	Rubber
Usage/Application	Industrial

Product Details:

Truncated ribs ensure flexibility, reduce heat build-up and improve rib crack resistance.
They enhance load-carrying capacity on small diameter pulleys.
Can be installed on grooved DriveR and flat DriveN pulley.

Yes! I am interested

Continental FHP V Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 35 / PieceGet Latest Price

Product Brochure

Product Details:

Belt Length	109 Inches
Brand	Continental
Heat Resistance	Yes
Temperature Range	+140 deg C
Length Range	76 inch
Country of Origin	Made in India

Our FHP V Belt run smoother, quieter, last longer and substantially improve energy efficiency compared to noncogged belts. You no longer have to accept the lower energy efficiency associated with envelope belts on fractional horsepower light-duty drives. Advanced V-belt technology has resulted in the development of a cut-edge, molded cog construction which exceeds conventional envelope belts in every performance category except oil resistance confirmed in extensive testing. The cogged design of our FHP V-belts (standard on 4L and 5L sizes) provides a greater surface area for heat dissipation and allows increased air flow around the belt during operation. These factors help to reduce internal belt temperatures and greatly improve belt life. Of course, the cogged design also improves flexibility, an especially important consideration where minimum or substandard sheave diameters are involved. Low cross section vibration in rubber-edged, cogged belts reduces noise generation. This allows you to take advantage of the longer life and high efficiency of FHP V-belts in noise-sensitive equipment. But even in typical factory settings, our FHP V-belts contribute to a quieter operating environment.

Advantages:

Cogged for cooler running
Low vibration for low noise
Superior efficiency for improved performance
Static conductive
Conditionally resistant to oil
Suitable for tropical climates
Dust-proof

Features:

Rubber cushion and insulation
Cut-edge, molded cogged construction
Heat, ozone and abrasion resistant

Also Available in:

Temperature Range -40 to +139 Deg C
Length Range 12 to 75 Inch

Yes! I am interested

Continental Timing Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2,200 / PieceGet Latest Price

Product Details:

Cross Section	5V
Brand	Continental
Material	PU
Thicknes	10 mm
Size	140 Inches
Length	15 meter
Temperature	120 Degree F
Country of Origin	Made in India

Torque Team Plus® belts are our highest capacity V-belts known for strength, durability and performance. The tension members are Aramid cable cords. They are twisted from Aramid fiber, which is five times stronger than steel, then are treated for improved adhesion, improved flex life and increased resistance to shrinkage.

Torque Team Plus belts exhibit only one-half of the initial elongation of other belts and maintain greater dimensional stability over the life of the belt. They stand up to higher horsepower, high-tension drive requirements, shock loads and abusive installations better than standard joined belts, multiple V-belt teams or chain and sprocket drives.

The cushion is made of a highly engineered compound that resists harsh operating environments and compression fatigue. The envelope is also rubber compound-impregnated to protect the carcass from abrasion, heat, ozone and oil. Together, these components offer a strong, flexible and efficient belt with extended service life.

Yes! I am interested

Continental HY-T Torque Team PU Classical Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

Belt Length	109 Inches
Brand	Continental
Material	PU
Height	23 mm
Temperature	150 Degree F
Width	38 mm
Country of Origin	Made in India

HY-T® Torque Team® Classical belts are built with strong Vytacord tension members. This provides the high-strength, high-horsepower rating capacity needed to effectively transmit drive power. Vytacord tension members are tough enough to tolerate the misalignment that quickly destroys belts.

The Vytacord material has a very good dimensional stability. Drive performance is consistent, reliable and predictable over the life of the belt. We then add a tough oil- and abrasion-resistant fabric backing to provide maximum longitudinal flexibility and lateral strength to withstand the dynamic forces acting within a joined belt. The backing also has special adhesion characteristics that enable it to bond inseparably to the V-sections to maintain the unitary integrity of the belt.

The cushion in both envelope and cut-edge construction is fiber-loaded. Cut-edge constructions have a fiber-loaded, latest-technology compound that contributes heat and oil resistance and strength.

Height- 6-22mm
Width - 10-37mm
Temperature -60 to 149 Deg F

Yes! I am interested

PU Double V Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 400 / PieceGet Latest Price

Product Details:

Material	PU
Temperature	130 Degree F
Thickness	15 mm
Heat Resistance	Yes
Color	Black
Length	8 Meter

To meet the multiple-bend and dual-power requirements, we build Double V Belt with rugged Vytacord tension members. They deliver maximum strength with minimum elongation. They also work with all the other quality materials that are a part of our Hex belts to deliver maximum performance over a long, trouble-free life. Hex belts are available in AA, BB and CC cross sections. A special Dry Can Hex construction is available with a special deep CC cross section designated CCP.

Also Available in:

Temperature -54 to 129 Deg F
Thickness 10-14mm
Length 5 -7 Meter

Yes! I am interested

Continental Torque-Flex PU V-Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 200 / PieceGet Latest Price

Product Details:

Material	PU
Length	150mm
Thicknes	10 mm
Packaging Type	Box
Temperature	+70 Degree C
Country of Origin	Made in India

Torque-Flex V-belts provide more horsepower per dollar. Torque-Flex v-belts are fully cogged to provide the flexibility needed to keep their high-traction rubber edges in contact with the sheave grooves. This high efficiency allows you to achieve the horsepower you need at a lower total drive cost.

igid quality assurance programs imposed during manufacturing result in belt angles and belt lengths which are more exact than standard belts. This results in quiet, smooth-running and long-lasting belts. Think what that can save in reduced downtime and belt maintenance. This consistency means you can be sure that two belts of the same size and manufacturer will match no matter when or where they were produced.

Also Available in:

Temp - -20 +69 Degree C
Length 10-149 mm
Thickness 8 And 9 mm

Yes! I am interested

Industrial PU Poly-V Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 90 / PieceGet Latest Price

Product Details:

Material	PU
Temperature	-20/+80 Deg C
Height	23 mm
Usage	Industrial
Thickness	50mm
Country of Origin	Made in India

The Poly-V® belt is a single, endless belt with longitudinal V-shaped ribs that mate consistently with the V-grooves in the sheaves. It combines the convenience of a thin, one-piece flat belt with the strong gripping traction of multiple V-belts to make the Poly-V belt far better than either for many applications.

To distribute the drive load evenly across the full width of the sheave, the Poly-V belt is built as a single unit with a completely supported, uninterrupted tension member. There is no matching problem. No separate belts to turn over, grab, slip or interfere with each other. The thin cross-section profile allows use of smaller pulleys than standard V-belts and Poly-V belts handle speed ratios of 40:1.

With all this capacity, the Poly-V belt tracks properly without special guides, flanges, crowns or deep grooves. And it resists seating in the grooves, so speed ratios remain more consistent and output speed remains more uniform.

Also Available in:

10-22mm

Yes! I am interested

Gates PU Poly Chain Belts

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1,500 / PieceGet Latest Price

Product Details:

Material	PU
Rib Pitch	3/16"
Usage/Application	Industrial
Color	Black
Brand	Gates
Number of Teeth	100
Width	36 mm

We are dealing in Gates Poly Chain Belts. We are also having wide range of products that.

Also Available in:

Number Of teeth - 60 - 90
Width 20 - 35mm

Yes! I am interested

Continental Torque Team Laminated V-Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2,200 / PieceGet Latest Price

Product Details:

Application	Power Transmission
Brand	Continental
Material	PU
Thickness	20 mm
Length	15 meter
Temperature	180 Degree F

Continental Torque Team Laminated V-belts can withstand the punishment that results from jams in log and lumber processing applications.

Standard V-belts resist slipping when a jam occurs, causing excessive heat buildup that can lead to belt failure and costly downtime. But that wont happen with Torque Team.

The special sidewall of Torque Team Laminated V-belts acts as a control switch, allowing the belts to slip as needed until the obstruction is cleared. As a result, the superior wear-resistant capabilities of Torque Team Laminated V-belts are maintained, increasing belt life up to four times longer than standard V-belts.

Also Available in:

Thickness 10-19 mm
Length 10-14 meter
Temperature -54 to 179 Deg F

Yes! I am interested

Gates Industrial Micro-V J-Section Belts

REQUEST CALLBACK

Get Best Quote

Approx. Rs 900 / PieceGet Latest Price

Product Details:

Brand	Gates
Rib Pitch	3/32"
Temperature Range	Max +80 Deg C
Usage/Application	Industrial
Material	Rubber
Effective Length	32 inch
Max No of Ribs	211
Weight	0.073 lbs

Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment, and many more. Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V® belt products includes slabs in several widths as well as single belts in PJ, PK, PL and PM sections in order to perfectly match customer requirements.

Product Details:

High modulus, low stretch polyester tensile member provides superior resistance to fatigue and shock loads.
All elastomeric rubber compound provides oil and heat resistance.
Specially formulated fibre reinforced undercord that improves belt stability.

Yes! I am interested

Continental Wedge TLP Narrow V-Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 90 / PieceGet Latest Price

Product Details:

Cross Section	3V
Brand	Continental
Angle	40 Degree
Material	PU
Temperature	65 Deg C
Thickness	20 mm
Country of Origin	Made in India

Wedge TLP™ is the longest lasting narrow v-belt in our lineup. It's constructed with a homogenous, one-piece design, the Wedge TLP Narrow V-belt delivers total lasting performance that is virtually maintenance free. Its high-modulus, high-denier cord can handle a significant increase in horsepower over our current HY-T Wedge.

Wedge TLP’s unique advanced construction process includes use of a specialized reinforcement and compounds that make this Narrow V-belt virtually maintenance free. Install this belt the first time with proper installation techniques and take advantage of reduced downtime and maintenance. With its greater horsepower capacity, Wedge TLP allows you to deliver the same amount of horsepower with a lesser number of belts. Fewer belts mean fewer sheave grooves; the combination of the two means lower-cost belt drives.

Wedge TLP belts offer supreme durability and wear resistance– plus better fit even in worn sheaves. That is all because of its two envelope plies and specialty blended, fiber-rich compounding that help support increased horsepower, with less deformation under tension.

Also Available in:

Temperature 35 - 64 Deg C
Thickness 6-19mm

Yes! I am interested

Continental Neothane PU V-Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 70 / PieceGet Latest Price

Product Details:

Belt Length	670 mm
Brand	Continental
Material	PU
Width	12.5 mm
Shape	Round
Height	10 mm
Country of Origin	Made in India

Neothane® V-belts can provide a different approach to V-belt power transmission for appliances and light-duty machinery. The features of the belt will make it possible to gain competitive advantages in many areas of application.

Advantages:

Smooth operation due to precision belt characteristics
Reduced maintenance provided by its resistance to elongation or shrinkage
Ribbed top for transverse rigidity, flexibility and cool running conditions
Conditionally resistant to oil

Technical Specifications:

Polyurethane
Ribbed top
Polyester tension member

Width 10mm

Yes! I am interested

Gates Industrial Micro-V L-Section Belts

REQUEST CALLBACK

Get Best Quote

Approx. Rs 600 / PieceGet Latest Price

Product Details:

Brand	Gates
Effective Length	50 inch
Max No of Ribs	105
Material	Rubber
Usage/Application	Industrial
Rib Pitch	3/16"

Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. The full line of Micro-V® belt products includes slabs in several widths as well as single belts in PJ, PK, PL and PM sections in order to perfectly match customer requirements. Our exclusive truncated profile gives Gates® Micro-V® L-Section belts increased flexibility and resistance to heat build-up, enabling better performance at higher speeds on smaller diameter sheaves. This makes Gates Micro-V® belts an ideal choice for applications where space is at a premium, such as appliances, roller conveyors, machine tools, and medical equipment.

Product Details:

Truncated ribs ensure flexibility, reduce heat build-up and improve rib crack resistance.
Truncated ribs enhance load-carrying capacity on small diameter pulleys.
High modulus, low stretch polyester tensile member provides superior resistance to fatigue and shock loads.

Yes! I am interested

Gates Industrial Micro-V M-Section Belts

REQUEST CALLBACK

Get Best Quote

Approx. Rs 700 / PieceGet Latest Price

Product Details:

Brand	Gates
Effective Length	86.5 inch
Max No of Ribs	105
Weight	3.25 lbs
Material	Rubber
Usage/Application	Industrial

Product Details:

Truncated ribs ensure flexibility, reduce heat build-up and improve rib crack resistance.
Enhances load-carrying capacity on small diameter pulleys.
Can be installed on grooved DriveR and flat DriveN pulley.

Yes! I am interested

Continental HY-T-PLUS Wrapped V Belt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 90 / PieceGet Latest Price

Product Details:

Brand	Continental
Heat Resistance	Yes
Model	HY-T-PLUS
Thickness	1 Inches
Item Weight	4.2 Ounces
Country of Origin	Made in India

HY-T® Plus improved materials are the key to its durability and versatility. Whether you are talking about rubber belts or metal chains, most materials will elongate when put to use. The secret to reliable performance is not to eliminate elongation, but to control it so that it is minimal, predictable and uniform. To achieve these criteria, we developed the Vytacord tensile member.

Vytacord provides the high-strength, high-horsepower rating capacity needed to effectively transmit today’s drive power. It is even tough enough to tolerate slight sheave misalignment that would quickly destroy ordinary belts. The Vytacord tensile member provides dimensional stability. As a result, each belt of a given size will maintain its length consistency, no matter when or where it was produced. The exceptional dimensional stability properties of HY-T Plus eliminates matching problems, improves performance and increases service life.

Our engineered heat- and oil-resistant rubber compound is used in both the cushion and insulation sections of HY-T Plus. Belt construction provides the flexibility on small pulleys. As a result the belt is able to serve a dual purpose for both Classical and FHP, while offering more versatility than any other Classical belt.

Yes! I am interested

Looking for V Belts ?